Titan Plate-Loaded Chest Press Machine
An independent-arm chest press with an FID bench built in, rated to 1,000 lb — and the bench stores on the frame.
Specs
| Minimum footprint | 64 in W x 63 in L |
|---|---|
| Maximum footprint | 64 in W x 77 in L |
| Back pad | 23 x 9.5 in |
| Seat pad | 11 to 8 in x 12.5 in |
| Lifting arm length | 34 in |
| Vertical handle spread | 26.5 in |
| Horizontal handle spread | 33 in |
| Weight post length | 9.5 in |
| Weight post diameter | 49 mm |
| Lifting arm positions | 5 |
| Bench depth positions | 13 |
| Weight capacity | 1,000 lb |
| Product weight | 155 lb |
| Material | Steel, powder-coated black |
These figures are copied from Titan Fitness’s own published specs and were last checked on 2026-08-31. Manufacturers revise products without notice, and variants differ. Confirm anything your decision depends on with Titan Fitness before you buy.
Choose this one if
- You want to press heavy without a spotter or a bar over your face
- You want independent arms so one side cannot carry the other
- You have 64 by 77 inches to give it
The detail
Independent arms are the reason to own a plate-loaded chest press rather than just a bench. With a barbell, your stronger side quietly takes more of the load and you never know. Independent arms cannot do that — each side moves on its own path, so a weak side is exposed and trained.
The second reason is safety. A press machine has no bar over your face and no failure mode that ends with a loaded barbell on your chest. For anyone training alone, that is the difference between pressing to failure and pressing to "probably enough".
Five lifting arm positions and 13 bench depth positions is a lot of adjustment, and it is what lets you find a press angle and a seat distance that match your arm length rather than the machine's assumptions. Most home machines give you three of each.
A 1,000 lb capacity is well beyond what anyone will press, and it is what a 155 lb steel frame supports rather than a marketing number.
The 9.5-inch weight posts are the practical limit. That is roughly two bumpers or four iron plates per side — plenty for a chest press, and worth knowing before you assume the 1,000 lb rating is reachable.
The bench stores on top of the frame, which is the detail that makes a 64 by 77 inch machine liveable: the FID bench is part of the unit rather than a second object taking floor.
At 64 inches wide minimum this is a large piece of equipment. Measure before ordering; that is wider than most power racks.