Titan Fitness

52 products

• Titan Cable Tower, 320 lb Selectorized

  A 320 lb selectorized tower with 1:1 lat and row and a 2:1 cable column — two ratios, 31 positions, 748 lb of machine.

• Titan Dumbbell Storage Rack

  A 27 lb dumbbell rack in tower or A-frame form, 17 inches wide and rated to 500 lb.

• Titan Elite Series Mass Storage System

  A 2,000 lb shelving unit for dumbbells, kettlebells and slam balls — modular, and heavier than most racks.

• Titan Elite Series Adjustable FID Bench

  Six back angles, four seat angles and a decline position — with capacity that halves the moment you tilt it.

• Titan Elite Series Single Post Flat Bench

  A competition-width 12-inch pad on a single-post frame, rated to 1,000 lb at 56 lb of bench.

• Titan Elite Series Power Barbell

  A 29 mm power bar at 220,000 PSI and 2,000 lb, with aggressive mountain knurl and an aggressive centre knurl.

• Titan TITAN Series Horizontal Barbell Holders

  The same bracket as the vertical holders turned sideways — for anyone whose ceiling will not take a bar stood on end.

• Titan Marrs Bar

  A 62 lb padded cambered bar with a 45-degree drop and fixed handles — squats and presses without your hands going anywhere near your shoulders.

• Titan Nemesis 300 lb Functional Trainer

  A single-stack trainer whose 4:1 independent ratio makes 300 lb of plates feel like 75 — read the ratio before you judge the stack.

• Titan Performance Series Adjustable Bench

  Seven back angles and three seat angles on 3-inch 11-gauge steel, rated 650 lb at any angle — and 52 lb, so it moves.

• Titan Plate-Loaded Assisted Pull-Up and Dip Machine

  Plate-loaded bodyweight assistance with a fold-away knee pad — assisted pull-ups today, unassisted later, same machine.

• Titan Plate-Loaded Chest Press Machine

  An independent-arm chest press with an FID bench built in, rated to 1,000 lb — and the bench stores on the frame.

• Titan Plate-Loaded Fly Machine

  A dual-cam fly and rear-delt machine on a 28 by 32 inch footprint — two exercises from two handle positions.

• Titan Plate-Loaded Linear Hack Squat Machine

  A 35-degree hack squat carriage rated to 700 lb — quad training with nothing on your spine.

• Titan Plate-Loaded Hip Abductor and Adductor Machine

  One machine for both hip abduction and adduction, with a 180-degree range and a counter-balance post.

• Titan Plate-Loaded Lat Tower

  A freestanding lat pulldown and low row at 1:1, rated to 400 lb — the plates you load are the weight you pull.

• Titan Plate-Loaded Seated Row

  A chest-supported row with adjustable seat, chest pad and grip width — 80 lb, and it fits in a corner.

• Titan Plate-Loaded Deltoid and Shoulder Press Machine

  A shoulder press and lateral raise machine in one frame — independent arms on sealed bearings, rated to 700 lb.

• Titan Plate-Loaded Lying T-Bar Row Machine

  A chest-supported T-bar row rated to 440 lb with a 12.7-inch sleeve — 22 inches tall, and nothing on your lower back.

• Titan Rackable Camber Bar

  An 85 lb cambered squat bar with an 18-inch drop, rated to 1,000 lb — the load swings, and that is the training effect.

• Titan Rackable Hex Trap Bar

  An 85-inch trap bar that sits in J-cups, with two handle heights and a 16-inch loadable sleeve.

• Titan TITAN Series Adjustable Bench

  A flat-incline-upright bench with a back pad that extends to close the gap — the thing most benches at this price get wrong.

• Titan TITAN Series Cerakote Olympic Barbell

  An American-made 28.5 mm all-rounder at 190,000 PSI, with volcano knurl, dual marks and no centre knurl.

• Titan TITAN Series Change Plate Holder

  Two 4-inch posts on a rack-mounted plate, for the change plates that otherwise live in a pile.

• Titan TITAN Series Deadlift Bar

  A 90.5-inch, 200,000 PSI bar built to bend — aggressive knurl, no centre knurl, rated to 2,000 lb.

• Titan TITAN Series Flip-Down Safety Bars

  A pair of 3-inch 11-gauge safeties rated to 1,700 lb that fold up against the upright — and double as a pulling platform.

• Titan TITAN Series Half Rack

  A 3x3 half rack rated to 2,000 lb rackable and 10,000 lb total, on a flat-foot base that does not need bolting.

• Titan TITAN Series Lat Tower Power Rack Attachment

  A plate-loaded lat pulldown and low row that mounts between the uprights of a TITAN Series rack — 400 lb capacity, and it bolts to the floor.

• Titan TITAN Series Multi-Grip Pull-Up Bar

  Traditional, narrow, angled and neutral grips from one 20 lb crossmember, with a 32 mm grip.

• Titan TITAN Series Power Bar

  A USA-made 20 kg powerlifting bar with aggressive knurl and a centre knurl — but a 28.5 mm shaft, which is not what “power bar” usually means.

• Titan TITAN Series Power Rack, 90 x 36

  A 3x3 four-post cage rated 2,000 lb rackable and 10,000 lb total, with 2-inch hole spacing throughout.

• Titan TITAN Series Safety Squat Bar

  A 22-degree camber and a 16-inch loadable sleeve — more drop and more room for plates than the usual safety squat bar.

• Titan TITAN Series Shorty Olympic Barbell

  A 14 kg, 72.75-inch bar for rooms a 7-foot barbell will not fit — American steel at 145,000 PSI.

• Titan TITAN Series Single Post Flat Bench

  A 3x3 single-post flat bench rated to 1,200 lb, with a 14-inch pad and nothing in the way of your feet.

• Titan TITAN Series Smith Machine Power Rack Attachment

  A linear-bearing Smith machine that bolts to a TITAN Series rack — 11 height positions, 500 lb capacity, 7.75 inches of depth.

• Titan TITAN Series Squat Stand

  The half rack minus the back — same 3x3 steel and 90.5-inch height, 47 lb lighter and rated to 1,500 lb rackable.

• Titan TITAN Series Weight Plate Holders

  A pair of 11.25-inch rack horns rated 330 lb each — plates stored where you load the bar.

• Titan TITAN Series Women's Olympic Barbell

  A 15 kg American-made bar with volcano knurl, dual marks and no centre knurl — 190,000 PSI on a 25 mm shaft.

• Titan T-3 Series Dumbbell Holders

  J-hook-style dumbbell cradles for a T-3 rack, 250 lb each, mountable inside or out.

• Titan T-3 Series Half Rack

  A 92.5-inch 2x3 half rack with Westside spacing, four plate holders and a 1,000 lb rating.

• Titan T-3 Series Power Rack, 82 x 24

  The short, shallow T-3 — 82 inches tall and 24 deep, for basements where the 91-inch version simply will not stand up.

• Titan T-3 Series Safety Strap Spotter Arms

  Nylon strap safeties rated to 800 lb per pair that fold up on the rack — the quietest way to fail a lift.

• Titan T-3 Series Space Saving Rack

  A wall-mounted rack with only 12 inches of inside depth — you lift in front of it rather than inside it, and it never has to fold.

• Titan T-3 Series Tall Squat Stand

  A 92.5-inch 2x3 squat stand with Westside spacing and a pull-up bar, at 140 lb and 1,000 lb rated.

• Titan T-3 Series Yoke

  A squat stand, sled and strongman yoke in one 166 lb frame — 750 lb rated, on skid feet.

• Titan TITAN Series Vertical Barbell Holders

  Two rack-mounted brackets that stand bars on end — the cheapest fix for the most common home-gym problem, which is bars on the floor.

• Titan Vertical Weight Plate Storage with Wheels

  A wheeled tree that stands ten-plus bumpers on end in a 24-inch square — plates off the floor without giving a wall over to them.

• Titan X-3 Series Half Rack

  3x3 steel and a 42-inch walk-in on a 48-inch square base — a full rack’s working space without the back half.

• Titan X-3 Series Bolt Down Power Rack

  Titan’s 3x3 rack — the same steel as racks costing twice as much, with a 1,650 lb rackable capacity and a bolt-down requirement you should take literally.

• Titan X-3 Series Safety Strap Spotter Arms

  The 3x3 version of Titan's strap safeties — 1,000 lb per pair on a wider 3-inch strap.

• Titan T-3 Series Power Rack

  The cheapest rack that isn’t a compromise on safety — 2x3 11-gauge steel and a 1,100 lb rackable capacity for well under the price of a 3x3 cage.

• Titan T-3 Folding Power Rack

  A wall-mounted rack that folds to five inches from the wall, for a garage that has to go back to being a garage.