Titan Rackable Hex Trap Bar
An 85-inch trap bar that sits in J-cups, with two handle heights and a 16-inch loadable sleeve.
Specs
| Overall height | 8 in |
|---|---|
| Overall length | 85 in |
| Overall width | 26.25 in |
| Loadable sleeve length | 16 in |
| Sleeve diameter | 48 mm |
| Handle spread | 22 in |
| Handle length | 19.5 in |
| Handle diameter | 32 mm |
| Knurling | Medium diamond |
| Material | 1.5 in steel tubing |
| Finish | Powder-coated black |
| Weight capacity | 800 lb |
| Product weight | 60 lb |
These figures are copied from Titan Fitness’s own published specs and were last checked on 2026-08-31. Manufacturers revise products without notice, and variants differ. Confirm anything your decision depends on with Titan Fitness before you buy.
Choose this one if
- You want a trap bar you can rack instead of leaving on the floor
- You want two handle heights and a 16-inch sleeve
- You squat and press with the trap bar as well as pulling
The detail
Most trap bars do not rack, and that is their biggest practical failing. The Fringe hex bar says so explicitly; the PRX version has 9.5-inch sleeves and lives on the floor. This one has an 85-inch rackable frame that sits in standard J-hooks, which means you can rack-pull with it, unrack a loaded bar for carries, and store it where every other bar lives.
The 16-inch loadable sleeve is the other headline — roughly ten iron plates or three bumpers per side, against 9.5 inches on the PRX and 12 on the Fringe. On a bar people load heavier than their straight-bar deadlift, that matters.
Two handle heights from flipping the bar is the standard trap bar feature and it is genuinely useful: the raised handles put the bar 8 inches off the floor, which shortens the range for a tall lifter or anyone working around a limitation.
At 32 mm the handles are thicker than a barbell shaft, which spreads load across the hand and turns carries into a bit of grip work. Medium diamond knurl is right for a bar you hold for a 40-yard walk.
The 800 lb capacity is the number to weigh. That is above the Fringe hex bar's 600 lb and below what a straight power bar takes. Add the bar's own 60 lb and it covers a very heavy trap-bar pull with margin.
Twenty-two inches of handle spread is a shade narrower than the 24 to 25 inches most trap bars use, which puts your hands closer to shoulder width and slightly reduces the leverage. Whether that suits you depends on your build.