Titan T-3 Series Power Rack
The cheapest rack that isn’t a compromise on safety — 2x3 11-gauge steel and a 1,100 lb rackable capacity for well under the price of a 3x3 cage.
Specs
| Material | 2 x 3 in, 11-gauge steel |
|---|---|
| Hole size | 11/16 in |
| Hole spacing | Westside through the bench and clean pull zone, 6 in side spacing |
| Overall height | 91 in |
| Max pull-up bar height | 88 in |
| Overall footprint | 54 x 44.75 in |
| Inside depth | 36 in |
| Inside width | 42 in |
| Rackable capacity | 1,100 lb |
| Whole rack capacity | 4,400 lb |
| Product weight | 210 lb |
| Uprights | 4, bolt-down |
These figures are copied from Titan Fitness’s own published specs and were last checked on 2026-08-30. Manufacturers revise products without notice, and variants differ. Confirm anything your decision depends on with Titan Fitness before you buy.
Choose this one if
- Your budget is the binding constraint and you’d rather have a real rack than a squat stand
- You can anchor to a slab, which this rack expects
- You accept a smaller attachment ecosystem in exchange for a much lower price
The detail
The T-3 is the rack to buy when the alternative is not buying a rack. It uses 2x3 inch 11-gauge uprights instead of 3x3, which is the single decision that brings the price down, while still rating 1,100 lb rackable and 4,400 lb for the whole rack.
What you lose with 2x3 is stiffness and attachment compatibility. The rack flexes slightly more under a heavy rack pull, and the ecosystem built around 3x3 uprights doesn’t fit these. Titan sells its own attachments, and the selection is decent, but it’s a smaller world than 3x3 buyers live in.
The uprights are bolt-down and you should treat that as a requirement rather than a suggestion. A 2x3 rack at 91 inches has a high centre of mass on a 54 by 44.75 inch footprint; anchored to the slab it’s solid, unanchored it will walk under aggressive use.
Westside spacing through the bench and clean pull zone is the spec that matters day to day — it’s what lets you set J-cups and safeties at the height you actually want rather than the nearest inch or two. Above that zone the holes space out, which costs nothing, because nobody needs fine adjustment at pull-up height. The series also comes in an 82-inch height and a 24-inch depth if the 91 by 36 configuration is more rack than your ceiling or floor allows.