Cry Once
Disclosure Some links here are affiliate links. If you buy through one, we may earn a commission at no extra cost to you. Full disclosure.
Rogue Fitness / Barbells

Rogue Echo Bar

Rogue's budget 28.5 mm bar at 190,000 PSI — the same steel as the Ohio Bar, with Olympic marks only and a 1-year warranty.

View at Rogue Fitness

Specs

Bar weight20 kg
Bar length86.75 in
Diameter28.5 mm
Loadable sleeve length16.40 in
Bar useMultipurpose
KnurlMulti
Center knurlFalse
Knurl markOlympic
Shaft coatingBright zinc
Sleeve coatingBright zinc
Sleeve assemblyBushing
Tensile strength190,000 PSI
F RatingF8-R
OriginMade in the USA
Warranty1 year

These figures are copied from Rogue Fitness’s own published specs and were last checked on 2026-08-31. Manufacturers revise products without notice, and variants differ. Confirm anything your decision depends on with Rogue Fitness before you buy.

Choose this one if

  • You want Rogue steel and geometry at the lowest price they offer
  • You mostly do the Olympic lifts and do not need powerlifting marks
  • You are buying a second bar so two people can train at once

The detail

The Echo Bar is the Ohio Bar's geometry at a lower price, and the specification makes the relationship obvious: the same 28.5 mm shaft, the same 190,000 PSI steel, the same 86.75-inch length, the same 16.40-inch loadable sleeve, the same F8-R rating, made in the same Columbus plant. Rogue's own framing — budget price, same quality — is defensible on the numbers.

Two things are different, and both are real.

First, Olympic knurl marks only rather than dual. IWF spacing is marked and IPF is not, so if you bench and squat to powerlifting hand positions you are eyeballing it. For a mostly-Olympic lifter that is no loss at all.

Second, a 1-year warranty rather than the lifetime term on Rogue's premium bars. That is the clearest signal of where this sits in the range — the steel is the same, the commitment behind it is not.

Bright zinc on shaft and sleeves is the third difference and the one you will feel. Zinc is the least durable common finish; it will patina at contact points and eventually wear at the knurl, where a Cerakote or stainless bar would not. In a dry room it lasts fine; in a damp garage it is the compromise you are making.

No centre knurl, multi knurl and bushings make it a genuine do-everything bar in use.

At this price it is also the obvious second bar — the one that lets two people train without stripping plates.