Bells of Steel Buzz-Saw Heavy-Duty Adjustable Bench
An 1,000 lb adjustable bench on 11-gauge steel with an 11.8-inch pad — the heavy end of the Bells of Steel bench range.
Specs
| Length | 55.5 in (1,410 mm) |
|---|---|
| Width | 26.25 in (667 mm) |
| Height | 18.1 in (459 mm) |
| Pad width | 11.8 in (300 mm) |
| Pad thickness | 2.4 in (60 mm) |
| Steel thickness | 11-gauge |
| Weight capacity | 1,000 lb (453 kg) |
| Coating | Powder coat |
| Warranty | Limited lifetime on frame, 180 days on wheels and upholstery |
These figures are copied from Bells of Steel’s own published specs and were last checked on 2026-08-31. Manufacturers revise products without notice, and variants differ. Confirm anything your decision depends on with Bells of Steel before you buy.
Choose this one if
- You want a 1,000 lb rating on a bench that adjusts
- You want a narrow pad that lets your shoulders retract
- You want 11-gauge steel rather than the 13-gauge entry bench
The detail
A 1,000 lb rating on an adjustable bench is at the top of the range, and it is what separates this from Bells of Steel's own adjustable utility bench at 575 lb. The steel explains it: 11-gauge here against 13-gauge there.
Hinges and ladders are why adjustable benches usually rate below flat ones — the frame has to carry load through a joint. A four-figure rating on an adjustable frame means that joint is not the weak point.
At 11.8 inches the pad is narrow, and that is the right choice for pressing. Narrow lets your shoulder blades hang off the edges and retract fully; a wide pad props them up and feels more stable while pressing worse. Compare the Hero bench at 14 inches, which is the comfort-first end of the same catalogue.
Two point four inches of pad is firm rather than plush — appropriate, since foam that compresses under a heavy press costs you the platform you set up.
Eighteen point one inches is tall, an inch over the competition 17 and the usual consequence of an adjustment mechanism underneath. Shorter lifters should plan on plates under their feet.
At 55.5 inches long and 26.25 wide with the legs out, it needs more floor than a flat bench and will not tuck as tightly under a rack.
The warranty splits limited lifetime on the frame and 180 days on wheels and upholstery. Upholstery is what wears first on any bench, and Bells of Steel is consistent about saying so rather than implying a blanket lifetime term.
Bells of Steel does not publish the number of back or seat positions here — on an adjustable bench that is most of what you are buying. Ask before ordering.