Latest products
Page 24 of 25
-
Titan Fitness
Titan T-3 Series Tall Squat Stand
A 92.5-inch 2x3 squat stand with Westside spacing and a pull-up bar, at 140 lb and 1,000 lb rated.
-
Titan Fitness
Titan T-3 Series Yoke
A squat stand, sled and strongman yoke in one 166 lb frame — 750 lb rated, on skid feet.
-
Titan Fitness
Titan TITAN Series Vertical Barbell Holders
Two rack-mounted brackets that stand bars on end — the cheapest fix for the most common home-gym problem, which is bars on the floor.
-
Titan Fitness
Titan Vertical Weight Plate Storage with Wheels
A wheeled tree that stands ten-plus bumpers on end in a 24-inch square — plates off the floor without giving a wall over to them.
-
Titan Fitness
Titan X-3 Series Half Rack
3x3 steel and a 42-inch walk-in on a 48-inch square base — a full rack’s working space without the back half.
-
Titan Fitness
Titan X-3 Series Bolt Down Power Rack
Titan’s 3x3 rack — the same steel as racks costing twice as much, with a 1,650 lb rackable capacity and a bolt-down requirement you should take literally.
-
Titan Fitness
Titan X-3 Series Safety Strap Spotter Arms
The 3x3 version of Titan's strap safeties — 1,000 lb per pair on a wider 3-inch strap.
-
Vulcan Strength
Vulcan Absolute Training Bumper Plates
Virgin rubber bumpers accurate to within 10 grams, with a shot-peened zinc-plated steel insert and thickness published per size.
-
Vulcan Strength
Vulcan Bravo Bar
A 28.5 mm garage bar with lab-verified 165,000 PSI steel and light-to-medium knurl — and Vulcan says plainly it is not for commercial use.
-
Vulcan Strength
Vulcan Flat-Based Power Rack
A 305 lb 3x3 flat-foot cage with dual hole spacing, two pull-up bars and a lifetime steel warranty — no anchoring required.
-
Vulcan Strength
Vulcan High Hex Trap Deadlift Bar
A 75 lb hex bar with 24 inches of inside space and handles 8.5 inches off the floor — big, and it takes 16 inches of plates.
-
Vulcan Strength
Vulcan Prime Urethane Bumper Plates
90 Shore urethane on a solid hard-chromed insert, with thickness published per size and a raised lip that keeps the profile low.