Latest products
Page 16 of 25
-
REP Fitness
REP Fitness Commercial Open Trap Bar
The open trap bar with the handles welded on — pick 28 mm or a 28/38 mm hybrid once, and pick a sleeve length while you are at it.
-
REP Fitness
REP Fitness Dip Attachment, 1000 Series
A 400 lb dip attachment that slides onto the safeties of a PR-1000 series rack — width-adjustable, no tools.
-
REP Fitness
REP Fitness Dumbbell Rack 2.0
Angled hex shelves in a compact frame — one rack takes a 5 to 50 lb set, three take 5 to 125.
-
REP Fitness
REP Fitness Flip-Down Safeties 2.0
11-gauge in-rack safeties rated and drop-tested to 1,000 lb, with a twist-to-lock pin and no tools to fit.
-
REP Fitness
REP Fitness Front Foot Extension Pair 2.0
26 inches of 3x3 steel added to the base of a PR-5000, so you can lift outside the rack without bolting it down.
-
REP Fitness
REP Fitness Kettlebell Rack 2.0
Flat shelves with a back lip, rated 1,500 lb each — the geometry kettlebells actually need.
-
REP Fitness
REP Fitness Open Trap Bar
An open-backed trap bar with four interchangeable handle sets — the trap bar you can walk into, and the one you can re-spec later.
-
REP Fitness
REP Fitness PR-1100 Power Rack
A genuine entry-level cage — 2x2 in 14-gauge steel and a 700 lb capacity — which is a real rack, but a category below the 2x3 budget standard.
-
REP Fitness
REP Fitness PR-5000 Power Rack
REP’s flagship configurable rack, and the one that moves to 1-inch hardware — a heavier standard than the 5/8 in the rest of the category uses.
-
REP Fitness
REP Fitness Spotter Arms 2.0
Drop-tested to 1,000 lb, with full-length liners and a short version that doubles as an extended J-cup.
-
REP Fitness
REP Fitness Storage Wings
Plate and barbell storage bolted to the sides of a PR-5000 — adds 29 inches of width and keeps the rack's depth.
-
REP Fitness
REP Fitness Strive Air Bike
An air bike whose fan blade angle adjusts mechanically — resistance you set, not resistance dictated by how fast you pedal.