PRX Performance
28 products
-
PRX Build Limitless 6-Post Power Rack
A six-post 3x3 cage 77 inches deep with a rear storage bay, in three heights, rated to 1,000 lb.
-
PRX Build Limitless Half Rack
A 3x3 half rack in three heights with 1-inch bench-zone spacing and a 1,000 lb capacity — American-made and modular.
-
PRX Change Plates
Powder-coated recycled iron microplates made in the USA — a 0.4-inch-thick 2.5 that adds almost nothing to your sleeve.
-
PRX Color Fleck Bumper Plates
Recycled crumb rubber with a ten-year warranty — colour-coded so you can read the bar at a glance, at the cost of crumb’s durability.
-
PRX Compact Flat Weight Bench
A 35 lb flat bench whose legs fold so it stores 7 inches deep on a wall bracket — 660 lb capacity, no floor space.
-
PRX Competition Kettlebells
Cast iron competition bells with a 33 mm handle and identical dimensions at every weight — colour-coded to standard.
-
PRX Dakota Power Bar
A stiff, aggressively knurled 28.5 mm power bar with a centre knurl, made in the USA at 190,000 PSI.
-
PRX Elite Competition Bumper Plates
Solid rubber on a steel disc insert at durometer 90-92, with thickness published per size — a 45 at just 2 inches.
-
PRX EZ Curl Bar
A 19 lb hard-chrome EZ bar rated to 330 lb — the standard answer to curls hurting your wrists.
-
PRX Fractional Weight Plates
Colour-coded 0.25 to 1 kg fractionals thin enough to load without taking the collar off — 0.25 inches at the smallest.
-
PRX Hex Bar
A 45 lb hex bar with two handle heights — flip it over and the pull starts higher, which is the whole feature.
-
PRX Mako Olympic Barbell
A 28 mm needle-bearing bar with high whip and passive knurl — built entirely for the snatch and the clean, and unapologetic about it.
-
PRX Olympic Elite Bar
A dual-bronze-bushing bar in 20 kg and 15 kg versions, with light knurl and a lifetime warranty.
-
PRX Prime Bumper Plates
Solid-rubber bumpers with a warranty that splits by weight — and an explicit instruction never to drop the light ones alone.
-
PRX Profile CORE Low Ceiling Squat Rack
The folding CORE rack on 73-inch uprights, for ceilings down to 78 inches — 9 inches deep when folded up.
-
PRX Profile CORE Squat Rack
An 89-inch folding 3x3 rack rated to 1,000 lb, with a pull-up bar — for a garage that also holds a car.
-
PRX Profile Folding Bench
A bench that folds flat against the wall to a 12-inch profile — the answer for a garage that has to hold a car as well.
-
PRX Profile Lat Pulldown Attachment
An extended high-pulley arm that pushes the cable 8 inches off the rack and buys 12 inches of extra travel — the fix for pulldowns done with your knees in the upright.
-
PRX Profile PRO Weight Stack Functional Trainer
A folding rack and dual 160 lb functional trainer at 1:1 — cables that fold to the wall, with the minimum ceiling published per height.
-
PRX Profile PRO Folding Squat Rack
3x3 steel on a wall-mounted rack that folds to 11.25 inches — thicker uprights than the folding competition, at the cost of a deeper fold.
-
PRX Razortooth Weight Bench
Seven backrest angles and three seat angles on a galvanized ladder, rated to 1,200 lb — 132 lb of bench with wheels.
-
PRX Reef Power Barbell
A 29 mm power bar rated to 2,000 lb at 220,000 PSI — the highest capacity and the most aggressive knurl of any bar on this site.
-
PRX Rubber Hex Dumbbells
Fixed rubber hex dumbbells from 3 to 100 lb — nothing to adjust, nothing to break, and a handle that thickens as the weight goes up.
-
PRX SupraCurl Bar
A 25 lb curl bar with 360-degree rotating handles — the grip changes with your wrist instead of fighting it.
-
PRX Swift Barbell
The entry bar in PRX's range — 165,000 PSI and a 700 lb rating, with the same volcano knurl and dual marks as the expensive ones.
-
PRX Thresher Stainless Steel Barbell
Stainless shaft and stainless sleeves on a 28.5 mm general-training bar — bare-steel knurl feel with nothing to wear through.
-
PRX Weight Plate and Barbell Storage
A freestanding tree with 10.5-inch pegs at 18.5-inch spacing, taking plates and bars in one 24-inch footprint.
-
PRX Women's Olympic Prime Bar
A 15 kg American-made bar at 190,000 PSI with no centre knurl — the same steel as PRX's men's bars, on a 25 mm shaft.